SOM-COMe-CT6-EHL (E37)

This product is still in pre-series phase, samples can be ordered by contacting the SECO sales channel. The software resources on this page are not yet fully finalised and validated.

Depending on the configuration and following revisions, the features of the board are subject to change. For detailed information on hardware specifications, please visit www.seco.com

SOM-COMe-CT6-EHL is a COM Express® Rel. 3.0 Compact Type 6 Module with with Intel® Atom® x6000E Series, Intel® Pentium® and Celeron® N and J Series Processors.

For ordering purposes, the SOM-COMe-CT6-EHL is referred to by its base code, “E37”.

INDEX

1 How can I power on my module?
2 What is loaded in a standard module?
3 Updating the BIOS
4 Further Reading
5 Downloads
- 5.1 Clea OS
  - 5.1.1 Source code
  - 5.1.2 Binaries

How can I power on my module?

To work with this board, it is necessary to use one of the carriers compatible with the COM Express® standard. You can use one of the products listed on the Carrier Board for COM Express® for example the Carrier-COMe-T6-C30.

What is loaded in a standard module?

Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built in accordance with customers' requirements submitting a new ticket.

The BIOS version updated in your module is shown in Aptio Setup Utility menu under:

Main page
Advanced > SMBIOS Information page

Updating the BIOS

https://secogroup.atlassian.net/l/c/6PB1jhmQ

Downloads

Here you can find the latest version available:

This product is still in pre-series phase, samples can be ordered by contacting the SECO sales channel. The software resources on this page are not yet fully finalised and validated.

BIOS	E37_BIOS_1-09-13_EVAL
BIOS Tools	seco_elkhartlake_bios-tools_1.01.02.7z
Driver WIN10 LTSC	seco_elkhartlake_driver_windows10-2021-ltsc_mr5-rs5-1.00.00.7z
Driver WIN11 24H2 LTSC	seco_elkhartlake_drivers_win11_24h2_MR7.7z
6.x.x Linux Kernel	Linux_Kernel_6.0.6.7z
EAPI	https://git.seco.com/software/eapi/eapi/-/wikis/home

Clea OS

This board is fully supported by Clea OS, the operating system for the All-In-One IIot CLEA platform developed by SECO and based on Yocto. Clea OS is intended to provide the highest standards in terms of security and stability through features such as OTA (Over the Air) updates, dual partitions and fallback procedures. Clea OS integrates a Device Manager to communicate with the Cloud and allows a family of products to be managed as a fleet.

Source code

The source code for Clea OS can be found at the following Gitlab organization. To build a complete Yocto image from source, you can follow the readme of the repo manifest.

Binaries

The Yocto image binaries associated with the various Clea OS releases can be found at the following Release page.

SECO Technical Resources