SBC-MX6 (A62)
Depending on the configuration and following revisions, the board’s features are subject to change. For detailed information on hardware specifications, please visit www.seco.com.
SBC-MX6 is a low-end Single Board Computer with NXP i.MX6 Processor, that exploits the potential of a configurable expansion connector to fully meet any configuration flexibility needs. This SBC is ideal for digital signage, infotainment applications, and in all general purpose contexts requiring multimedia capabilities and high performance for the reproduction of relevant and/or engaging contents.
For ordering purposes, the SBC-MX6 is referred to by its base code, “A62”.
INDEX
How can I power on my module?
https://secogroup.atlassian.net/l/c/gzj1qAat
What will I find in my module?
Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built.
Contact your reference sales for further information.
What can I do now?
Blog Posts
-
How to Create a Recovery USB for SBC-3.5-PX30 (D23)
created by
02. Feb 2024
-
How to flash the SBC-3.5-PX30 (D23) eMMC/SDD
created by
02. Feb 2024
-
Create a bootable device for ARM ROCKCHIP
created by
08. Jun 2022
-
Display Configuration Guide
created by
08. Oct 2021
-
Build SECO BSP for i.MX and Rockchip boards
created by
21. May 2021
-
Create a bootable device for ARM i.MX BSPs
created by
21. May 2021
-
Configure the host PC
created by
21. May 2021
What are the features of the module?
The SBC-A62-J allows to directly access to some of the features of i.MX6 processor through the pin multiplexing. On-board there is a dedicated 32-pin expansion connector (J8, see Fig. 1) which is a standard dual-way male pin header.
Below is a description of the pinout configuration.
Pin Number | Pin Name | Pinout Configuration Options | Port Number | ||
---|---|---|---|---|---|
VCC_SW | x | x | x | x | |
2. | 3P3V | x | x | x | x |
3. | GND | x | x | x | x |
4. | EXP_GPIO_1 | x | GPIO1_IO09 | x | 1 |
5. | EXP_GPIO_2 | ECSPI2_MISO | GPIO2_IO25 | x | 2 |
6. | EXP_GPIO_3 | ECSPI2_SCLK | GPIO2_IO23 | x | 2 |
7. | EXP_GPIO_4 | ECSPI2_MOSI | GPIO2_IO24 | x | 2 |
8. | EXP_GPIO_5 | ECSPI2_SS0 | GPIO3_IO29 | x | 2 |
9. | EXP_GPIO_6 | FLEXCAN1_TX | GPIO1_IO07 | x | 3 |
10. | EXP_GPIO_7 | FLEXCAN1_RX | GPIO1_IO08 | x | 3 |
11. | EXP_GPIO_8 | UART4_CTS_B | GPIO6_IO03 | x | 4 |
12. | EXP_GPIO_9 | UART4_TX_DATA | GPIO5_IO30 | x | 4 |
13. | EXP_GPIO_10 | UART4_RTS_B | GPIO6_IO02 | x | 4 |
14. | EXP_GPIO_11 | UART4_RX_DATA | GPIO5_IO31 | x | 4 |
15. | EXP_GPIO_12 | x | GPIO3_IO28 | I2C1_SDA | 5 |
16. | EXP_GPIO_13 | SPDIF_IN | GPIO3_IO21 | I2C1_SCL | 5 |
17. | EXP_GPIO_14 | SPDIF_OUT1 | GPIO4_IO05 | x | 5 |
18. | EXP_GPIO_15 | SD1_CMD | GPIO1_IO18 | PWM4_OUT | 6 |
19. | EXP_GPIO_16 | SD1_CLK | GPIO1_IO20 | x | 6 |
20. | EXP_GPIO_17 | SD1_DATA0 | GPIO1_IO16 | x | 6 |
21. | EXP_GPIO_18 | SD1_DATA1 | GPIO1_IO17 | PWM3_OUT | 6 |
22. | EXP_GPIO_19 | SD1_DATA2 | GPIO1_IO19 | PWM2_OUT | 6 |
23. | EXP_GPIO_20 | SD1_DATA3 | GPIO1_IO21 | x | 6 |
24. | EXP_GPIO_21 | I2C3_SDA | GPIO7_IO11 | x | 7 |
25. | EXP_GPIO_22 | I2C3_SCL | GPIO1_IO03 | x | 7 |
26. | EXP_GPIO_23 | UART1_RX_DATA | GPIO5_IO29 | x | 8 |
27. | EXP_GPIO_24 | UART1_TX_DATA | GPIO5_IO28 | x | 8 |
28. | EXP_GPIO_25 | UART5_RX_DATA | GPIO6_IO01 | x | 9 |
29. | EXP_GPIO_26 | UART5_TX_DATA | GPIO6_IO00 | x | 9 |
30. | EXP_GPIO_27 | UART5_RTS_B | GPIO4_IO14 | FLEXCAN2_TX | 10 |
31. | EXP_GPIO_28 | UART5_CTS_B | GPIO4_IO15 | FLEXCAN2_RX | 10 |
32. | GND | x | x | x | x |
Accessories
These are the accessories offered by SECO for SBC-MX6 SBC.
For more information, click on the accessory of your interest.
Accessory | Description |
---|---|
Camera module with integrated KLT Auto-Focus 5MP and FCC cable (15 cm, 16-poles). Available in two versions:
| |
Display kit with 7” TFT RGB Display and I2C capacitive Touch Screen, and video cable | |
Display kit with 15,6" LVDS display and video cable | |
IEEE 802.11 b/g/n WiFi Module based on Ralink RT5370 chipset, with 7-pin USB interface | |
IEEE 802.11 b/g/n WiFi Module based on Ralink RT3070 Chipset, with external 50Ω 2.4GHZ antenna and 6-pin USB interface |
Please note that the KIT-WIFI-3M08-1 and the KIT-WIFI-3M08-2 have USB interfaces with a different number of pins. Each one can only be used with a board with the same number of pins.
Downloads
Clea OS
Starting from Linux Kernel version 5.10, the Board Support Package (BSP) for this board is fully integrated within Clea OS, the operating system for the All-In-One IIot platform CLEA developed by SECO and based on Yocto. Clea OS is intended to provide the highest standards in terms of security and stability thanks to features like OTA (Over the Air) updates, double partitions, and fallback procedures. Clea OS integrates a Device Manager to communicate with the Cloud and allows a family of products to be managed as a fleet.
Source code
The source code for Clea OS can be found at the following Gitlab organization. To build a complete BSP image from source, you can follow the readme of the repo manifest.
Binaries
The binaries (U-Boot, Linux Kernel, Yocto image) associated with the various CleaOS releases can be found at the following Release page.
Legacy Software
This section contains releases (source code and binaries) for older BSPs and Yocto images.
Source code
Source code for linux kernel, u-boot and yocto seco layers is available here.
Binaries
Board configuration | Version | image | filesystem | u-boot | kernel |
---|---|---|---|---|---|
SBC - 512M 2x256M | 4.19.35 - 3.4.0 | ||||
SBC - 1G 4x256M | 4.19.35 - 3.4.0 | ||||
SBC - 2G 4x512M | 4.19.35 - 3.4.0 | ||||
SYS- 512M 2x256M | 4.19.35 - 3.4.0 | ||||
SYS - 1G 4x256M | 4.19.35 - 3.4.0 | ||||
SYS - 2G 4x512M | 4.19.35 - 3.4.0 |