Open

End Of Life (Ende Produkt-Lebenszyklus) for Trizeps CPU modules with Strata-Flash.

Trizeps II-270 Description

The Trizeps II-270 can be used as a replacement or upgrade of older Trizeps-I and Trizeps-II Type Modules like Trizeps II Classic, Trizeps II K3, Trizeps II FX. Note: As it depends on the PXA270 Processor, the existing OS-Images for the Trizeps-I or Trizeps II platforms must be recompiled.

• XScale PXA270 processor(312-624MHz)

• Max. 64 MByte NOR-Flash

• Max. 128 MByte SDRAM

• LCD-controller 16 Bit VGA or 8 Bit SVGA

• 4-wire touch

• AC97 Audio-Codec: Mic, Line-In, Headphone

• PCMCIA/CompactFlash

• SD/MMC (1 Slot on Board)

• GPIO

• 3xUART

• I2C

• USB Host/Device Controller

Baseboard & Panels

The Trizeps II-270 fits into following Seco products:

• MT6N

Software

• Bootloader Trizeps IV (PXA270)

• BSP for Trizeps IV

Ordering Information

Trizeps-II Description

Open

• XScale PXA255 processor(400MHz)

• Max. 64 MByte NOR-Flash

• Max. 128 MByte SDRAM

• LCD-controller 16 Bit VGA or 8 Bit SVGA

• 4-wire touch

• AC97 Audio-Codec: Mic, Line-In, Headphone

• PCMCIA/CompactFlash

• SD/MMC

• GPIO

• 3xUART

• I2C

• USB Device Controller

Software

• Bootloader Trizeps-II/III (PXA255)

• BSP for Trizeps II

Technical Documents

• CChange Notice CODEC: 20130213_pcn_codec.pdf

EOL – End Of Life (Ende Produkt-Lebenszyklus)

• For Trizeps II with Marvell PXA270M CPU: 20190128_doc_eol_trizeps_ii_iv_v-1.pdf