Trizeps MX28.
Description
Low Cost, Small Formfactor 200 pin SODIMM only 67×25 mm !
Low Power Freescale iMX287 CPU 454MHz ARM926EJ-S core with 16KB/32KB Cache
128 KBytes of integrated low-power on-chip SRAM
1280 bits of on-chip one-time-programmable (OCOTP) ROM
NAND Flash 512 MByte SLC, Hardware BCH (up to 20-bit correction)
128MB 200 MHz 16-bit DDR2,
PMU with high efficiency on-chip DC/DC, supports Li-Ion batteries incl.charging!
LCD controller, up to 24-bit RGB (DOTCK) modes and 24-bit system-mode
Pixel-processing pipeline (PXP) supports full path from color-space conversion, scaling, alpha-blending to rotation without intermediate memory access.
10/100 Dual IEEE® 1588 Ethernet with RMII support and L2 Switch
One integrated Fast Ethernet Phy, One RMII for ext.Phy(4Bit to SODIMM)
Two 2.0B protocol-compatible Controller Area Network (CAN) interfaces
LCD Controller with Touchscreen
One USB2.0 OTG device/host controller and PHY
One USB2.0 host controller and PHY
SPDIF transmitter
i2S Audio Codec SGTL5000
8 General purpose 12-bit ADC channels and single 2 Msps ADC channel
Temperature sensor for thermal protection
Onboard micro SD Card Slot (also wired out)
Four synchronous serial ports (SSP) for SDIO/MMC/MS/SPI. Two can be used for SDIO/MMC/MS interfaces(supports SD2.0, eMMC4.4 and MSPro),and all can be used for the SPI interface.
Five application Universal Asynchronous Receiver-Transmitters UARTs), up to 3.25 Mbps with hardware flow control
One debug UART operating at up to 115 Kb/s using programmed I/O
Two I2C master/slave interfaces, up to 400 kbps
Four 32-bit timers and a rotary decoder
Multiple connectivity ports ( SSP, SDIO, SPI, I2S)
3.3V I/O, 10 year lifetime (Industrial)
Technical Documents
Datasheet:
Trizeps MX28 Datasheet / Manual
Pinning:
LCD Signals:
Software
BSP Compact 7, Windows CE 6.R3: BSP for Trizeps-MX28