/
SOM-Trizeps-VIII-MX8M-Plus ( Trizeps VIII Plus )
  • In progress

    • SOM-Trizeps-VIII-MX8M-Plus ( Trizeps VIII Plus )

    Owned by Anu Selvaraj (Deactivated)
    Last updated: 29. Aug 2024 by Michael Schieren
    27 min read

     

    Description

    The Trizeps VIII Plus is powered by NXP i.MX 8M Plus processor, which is designed to meet the latest market requirements of connected streaming audio/video devices, scanning/imaging devices and various devices demanding high-performance and low-power. It offers a 2.3 TOP/s Neural Processing Unit (NPU) for AI-applications like pattern, object and speech recognition.

    The i.MX 8M Plus family of processors features advanced implementation of a quad ARM® Cortex®-A53 core, which operates at speeds of up to 1.8GHz (consumer version) and 1.6GHz (industrial version). A general purpose Cortex®-M7 core processor is for low-power processing. A 32-bit LPDDR4 is used for memory. There are a number of other i.MX 8M Plus interfaces for connecting peripherals, such as displays, cameras, GPS and sensors, which are extended by components already available on the module:

    • a stereo, hi-fi quality audio-codec.

    • a FPGA with up to 4300 LUT to convert MIPI-DSI to parallel 24bpp display data and for user defined programmable logic.

    • a programmable Cortex-M0 Kinetis MCU, capable of realtime processing, reading multiple 16bit analog inputs or usable as resistive touch-controller.

    • WLAN 802.11 a/b/g/n/ac and BT 4.2 / 5 module

    The Trizeps VIII Plus module got a SODIMM200 card edge connector and a 60pin FX11 high-speed board connector. The pinning of both connectors is to a large extent compatible to previous Trizeps modules.

    Difference to Trizeps VIII

    The i.MX 8M Plus processor of Trizeps VIII Plus benefits from advanced 14nm LPC FinFET Technology, which allows for lesser power-consumption and higher operating frequencies than the i.MX8 used on Trizeps VIII.

    The Trizeps VIII offers:

    • support of 4K displays

    It misses following features:

    • 2.3 TOP/s NPU (Neural Processing Unit)

    • 2x CAN

    • second Ethernet-MAC

    • third SDIO-port routed to SODIMM

    Difference to Trizeps VIII Mini

    The i.MX 8M Mini processor of Trizeps VIII Mini can be considered as the predecessor to the i.MX 8M Plus processor used on Trizeps VIII Plus.

    The Trizeps VIII Mini lacks some of the interfaces:

    • 2.3 TOP/s NPU (Neural Processing Unit)

    • 2x CAN

    • second Ethernet-MAC

    • third SDIO-port routed to SODIMM

    • HDMI

    • multi-display support: only MIPI-DSI or LVDS may be used at the same time.

    • only USB2.0, instead of USB3.0 ports.

    Block Diagram

    Technical Documents

    Manual:

    Changes of key components over the revisions

     

    Ethernet PHY

    Audio Codec

     

    Ethernet PHY

    Audio Codec

    V1R1

    Qualcomm AR8031

    Cirrus WM8983

    V1R2

    Qualcomm AR8031

    Cirrus WM8983

    V1R3

    REALTEK RTL8211

    Cirrus WM8962

    V1R4

    REALTEK RTL8211

    Cirrus WM8962

    Features and Interfaces

    Features

    Processor:

    NXP i.MX 8M Plus ARM® Quad Cortex-A53 at up to 1.8GHz (consumer), 1.6GHz (industrial)
    NXP i.MX 8M Plus ARM® Cortex-M7 at up to 800MHz
    Neural Processing Unit 2.3 TOPS
    NXP Kinetis V ARM® Cortex-M0+ at up to 75MHz

    Memory:

    Up to 8 GByte of 32-bit LPDDR4-4000

    Storage:

    Micro-SD socket or
    4 or 8 GByte eMMC
    Higher densities are available on request.

    Wireless:

    WLAN 802.11 a/b/g/n/ac
    BT 4.2 and BT 5.0
    Micro RF-antenna connector

    Power:

    PMIC to generate all internal and external voltages from VSYS supply.

    Dimensions:

    (Length x Width x Height):      67.6 x 36.7 x 6.4 mm

    Interfaces / Signals accessible over connectors

    • Power Supply from +3.3V to +5V

    • 2x USB3.0 OTG port (USB Host or Slave)

    • PCIe

    • 2x SD/SDIO Card Interface

    • 4x UART

    • SPI and Quad-SPI

    • 2x I2C

    • MIPI Display (4ch) or parallel RGB Display

    • Single/Dual LVDS

    • HDMI

    • 2x Mipi Camera (4ch)

    • 1000/100/10Mbit Ethernet

    • 2x CAN/CAN-FD

    • 2x 4ch 16bit ADC

    • Stereo Headphone

    • Stereo Line-In

    • Microphone input (mono, optional stereo)

    • 1W Speaker output

    • SPDIF In and Out

    • Multi-Channel Serial-Audio-Interface

    • GPIO, PWM

    1      Pin-description

    The main connector of the Trizeps VIII Plus is the SODIMM200 connector.
    To operate, only VSYS and GND pins need to be connected. Leave unused pins unconnected.
    The U14 Board2Board connector can be omitted if the signals are not needed.
    J1 and J2 may be used for debugging, programming and testing.
    On the bottom side are UFL antenna connectors for the on-board WLAN + BT- chip.

     

     

    1.1      Pin-description (Primary Function)

    The i.MX8M Plus processor, the Cortex M0+ MCU and the FPGA are highly configurable devices, where each pin may have multiple different functions.
    The pin-names are derived from previous Trizeps-versions and their primary or most interesting function.
    Please view chapter “1.2 Pin-Mux Information” for details on how these pins may be configured by software.

    Notes:

    *1) In the table below, some of the old Trizeps pin-names are placed in brackets [] for reference.

    *2) FPGA_CIF_D[9..0]  / SAIx_RXD[7..0], FPGA_CIF_HSYNC, FPGA_CIF_MCLK and FPGA_CIF_PCLK are routed to the FPGA and the i.MX 8M Plus. In the following documentation they are either named FPGA_CIF_Dx or SAIx_RXDy, depending if the FPGA or i.MX 8M Plus function is described.

    *3) FPGA_CIF_VSYNC, FPGA_CIF_HSYNC, FPGA_CIF_MCLK and FPGA_CIF_PCLK are connected to i.MX 8M Plus pins, if the FPGA is not mounted (RA72).

    *4) BT_PCM_IN, BT_PCM_OUT, BT_PCM_SYNC and BT_PCM_CLK are connected to the on-board BT-module if it is mounted!

    *5) PCIE_CLKREQ may not be usable when Wifi module is mounted.

     

    J1: SODIMM Connector

    Signal

    Pin

     

    Pin

    Signal

    AUDIO_MIC_OUT

    1

     

    2

    VIN_AD3 (MCU)

    AUDIO_MIC_GND

    3

     

    4

    VIN_AD2 (MCU)

    AUDIO_LINEIN_L

    5

     

    6

    VIN_AD1 (MCU)

    AUDIO_LINEIN_R

    7

     

    8

    VIN_AD0 (MCU)

    AUDIO_AGND

    9

     

    10

    AUDIO_VDDA

    AUDIO_AGND

    11

     

    12

    AUDIO_VDD_SPEAKER

    AUDIO_HEADPHONE_GND

    13

     

    14

    TSPX (MCU)

    AUDIO_HEADPHONE_L

    15

     

    16

    TSMX (MCU)

    AUDIO_HEADPHONE_R

    17

     

    18

    TSPY (MCU)

    UART3_RXD

    19

     

    20

    TSMY (MCU)

    UART3_TXD

    21

     

    22

    SPIN22_RTS3

    UART1_DTR

    23

     

    24

    SPIN24_CTS3

    UART1_CTS

    25

     

    26

    RESET_IN

    UART1_RTS

    27

     

    28

    SPEAKER_R

    UART1_DSR

    29

     

    30

    SPEAKER_L

    UART1_DCD

    31

     

    32

    UART2_CTS

    UART1_RXD

    33

     

    34

    UART2_RTS

    UART1_TXD

    35

     

    36

    UART2_RXD

    UART1_RI

    37

     

    38

    UART2_TXD

    GND

    39

     

    40

    VSYS (+3V3/+5V)

    GND

    41

     

    42

    VSYS (+3V3/+5V)

    SPIN43

    43

     

    44

    LCD_EN

    SPIN45

    45

     

    46

    LCD_D07

    SD2_CLK

    47

     

    48

    LCD_D09

    CIF_D0

    49

     

    50

    LCD_D11

    SD2_DATA3

    51

     

    52

    LCD_D12

    CIF_D1

    53

     

    54

    LCD_D13

    SPIN55

    55

     

    56

    LCD_PCLK

    SAI1_RXD2

    57

     

    58

    LCD_D03

    SD2_DETECT

    59

     

    60

    LCD_D02

    SAI1_RXD3

    61

     

    62

    LCD_D08

    SAI1_RXD4

    63

     

    64

    LCD_D15

    SAI1_RXD5

    65

     

    66

    LCD_D14

    SAI1_RXD6

    67

     

    68

    LCD_HSYNC

    LED_GPIO

    69

     

    70

    LCD_D01

    SAI1_RXD7

    71

     

    72

    LCD_D05

    CIF_D8

    73

     

    74

    LCD_D10

    CIF_D9

    75

     

    76

    LCD_D00

    BACKLIGHT_PWM

    77

     

    78

    LCD_D04

    POWERFAIL

    79

     

    80

    LCD_D06

    SD2_DATA1

    81

     

    82

    LCD_VSYNC

    GND

    83

     

    84

    VSYS (+3V3/+5V)

    SD2_DATA2

    85

     

    86

    CIF_VSYNC (*3)

    RESET_OUT

    87

     

    88

    CIF_MCLK (*3)

    +3V3_AUX

    89

     

    90

    CIF_PCLK (*3)

    +3V3_AUX

    91

     

    92

    CIF_HSYNC (*3)

    N.C.

    93

     

    94

    I2C1_SCL

    SPIN95 [RDY]

    95

     

    96

    I2C1_SDA

    CAN1_RX

    97

     

    98

    GPIO_AUX

    CAN1_TX

    99

     

    100

    DISPLAY_ENABLE

    CAN2_RX

    101

     

    102

    AUDIO_ENABLE

    CAN2_TX

    103

     

    104

    SPIN104

    QSPI_SCLK [CS1]

    105

     

    106

    VSD_3V3

    QSPI_SS0 [CS3]

    107

     

    108

    VSYS (+3V3/+5V)

    GND

    109

     

    110

    SAI1_TXD0

    QSPI_DATA0 [A00]

    111

     

    112

    SAI1_TXD1

    QSPI_DATA1 [A01]

    113

     

    114

    SAI1_TXD2

    PCIE_CLKREQ (*5)

    115

     

    116

    SAI1_TXD3

    QSPI_DATA2 [A03]

    117

     

    118

    SAI1_TXD4

    QSPI_DATA3 [A04]

    119

     

    120

    SAI1_TXD5

    SPIN121 [A05]

    121

     

    122

    SAI1_TXD6

    CSI1_PWDN [A06]

    123

     

    124

    SAI1_TXD7

    CSI1_RESET [A07]

    125

     

    126

    SAI1_TXFS

    USB1_PEN

    127

     

    128

    SAI1_TXC

    USB2_PEN

    129

     

    130

    HDMI_DDC_SCL

    USB2_OC

    131

     

    132

    N.C.

    USB1_OC

    133

     

    134

    SPIN134

    USB1_VBUS

    135

     

    136

    SPIN136

    USB1_ID

    137

     

    138

    USB1_RXP

    USB1_DP

    139

     

    140

    USB1_RXN

    USB1_DN

    141

     

    142

    USB1_TXP

    USB2_DP

    143

     

    144

    USB1_TXN

    USB2_DN

    145

     

    146

    BT_PCM_IN (*4)

    GND

    147

     

    148

    VSYS (+3V3/+5V)

    HDMI_DDC_SDA

    149

     

    150

    LCD_D16

    USB2_TXP

    151

     

    152

    LCD_D17

    USB2_TXN

    153

     

    154

    PCIE_WAKE

    USB2_RXP

    155

     

    156

    VDD_FPGA_MIPI

    USB2_RXN

    157

     

    158

    PCIE_CLK_N

    SPDIF_IN [D05]

    159

     

    160

    PCIE_CLK_P

    SPDIF_OUT [D06]

    161

     

    162

    PCIE_TX_P

    SPDIF_EXT_CLK [D07]

    163

     

    164

    PCIE_TX_N

    LED_WL

    165

     

    166

    PCIE_RX_P

    LED_BT [D09]

    167

     

    168

    PCIE_RX_N

    VDD_ENET_IO [D10]

    169

     

    170

    FPGA_LCD_D21 or SD3_DATA0

    ETH_LED_SPEED1000 [D11]

    171

     

    172

    FPGA_LCD_D20 or SD3_DATA1

    ETH_TRX2_N [D12]

    173

     

    174

    FPGA_LCD_D19 or SD3_DATA2

    ETH_TRX2_P [D13]

    175

     

    176

    FPGA_LCD_D18 or SD3_DATA3

    ETH_TRX3_N [D14]

    177

     

    178

    FPGA_LCD_D23 or SD3_CLK

    ETH_TRX3_P [D15]

    179

     

    180

    FPGA_LCD_D22 or SD3_CMD

    GND

    181

     

    182

    VSYS (+3V3/+5V)

    ETH_LED_LINK_AKT

    183

     

    184

    BT_PCM_OUT (*4)

    ETH_LED_SPEED100

    185

     

    186

    BT_PCM_CLK (*4)

    ETH_TRX0_N

    187

     

    188

    BT_PCM_SYNC (*4)

    ETH_TRX0_P

    189

     

    190

    SD2_CMD

    ETH_GND

    191

     

    192

    SD2_DATA0

    ETH_TRX1_N

    193

     

    194

    I2C2_SDA

    ETH_TRX1_P

    195

     

    196

    I2C2_SCL

    GND

    197

     

    198

    VSYS (+3V3/+5V)

    GND

    199

     

    200

    VCC_SNVS (+3V3)

     

    J2: Board2Board Connector

    Signal

    Pin

     

    Pin

    Signal

    MIPI_CSI1_D2_P

    1

     

    2

    MIPI_DSI_D3_P

    MIPI_CSI1_D2_N

    3

     

    4

    MIPI_DSI_D3_N

    MIPI_CSI1_D3_P

    5

     

    6

    MIPI_DSI_D2_P

    MIPI_CSI1_D3_N

    7

     

    8

    MIPI_DSI_D2_N

    MIPI_CSI2_CLK_P

    9

     

    10

    LVDS1_TX2_P

    GND

    11

     

    12

    GND

    MIPI_CSI2_CLK_N

    13

     

    14

    LVDS1_TX2_N

    MIPI_CSI2_D0_P

    15

     

    16

    LVDS1_TX3_N

    MIPI_CSI2_D0_N

    17

     

    18

    LVDS1_TX3_P

    MIPI_CSI2_D1_P

    19

     

    20

    LVDS1_CLK_P

    MIPI_CSI2_D1_N

    21

     

    22

    LVDS1_CLK_N

    MIPI_CSI2_D2_P

    23

     

    24

    LVDS1_TX0_P

    MIPI_CSI2_D2_N

    25

     

    26

    LVDS1_TX0_N

    MIPI_CSI2_D3_P

    27

     

    28

    LVDS1_TX1_P

    MIPI_CSI2_D3_N

    29

     

    30

    LVDS1_TX1_N

    MIPI_DSI_D1_P

    31

     

    32

    MIPI_DSI_D1_N

    GND

    33

     

    34

    GND

    LVDS0_TX1_N

    35

     

    36

    MIPI_DSI_CLK_N

    LVDS0_TX1_P

    37

     

    38

    MIPI_DSI_CLK_P

    LVDS0_TX0_P

    39

     

    40

    HDMI_TX1_P

    LVDS0_TX0_N

    41

     

    42

    HDMI_TX1_N

    LVDS0_CLK_N

    43

     

    44

    HDMI_TX2_P

    LVDS0_CLK_P

    45

     

    46

    HDMI_TX2_N

    LVDS0_TX2_P

    47

     

    48

    HDMI_HPD

    LVDS0_TX2_N

    49

     

    50

    HDMI_CLK_N

    LVDS0_TX3_P

    51

     

    52

    HDMI_CLK_P

    LVDS0_TX3_N

    53

     

    54

    HDMI_CEC

    GND

    55

     

    56

    GND

    MIPI_DSI_D0_N

    57

     

    58

    HDMI_TX0_N

    MIPI_DSI_D0_P

    59

     

    60

    HDMI_TX0_P

    MIPI_CSI1_D0_N

    61

     

    62

    MIPI_CSI1_CLK_N

    MIPI_CSI1_D0_P

    63

     

    64

    MIPI_CSI1_CLK_P

    MIPI_CSI1_D1_P

    65

     

    66

    MIPI_CSI1_D1_N

    GND

    67

     

    68

    GND

      

    J90: i.MX8M JTAG Connector

    This flex-cable-connector uses the SECO Northern Europe JTAG connector standard. An Adapter to Multi-ICE pin-header is available.

    Pin

    Signal

    1

    +3V3

    2

    GND

    3

    JTAG_TMS

    4

    N.C.

    5

    JTAG_TCK

    6

    JTAG_TDO

    7

    JTAG_TDI

    8

    JTAG_RESET_N

     

    J91: FPGA & MCU JTAG Connector

    This flex-cable-connector uses the SECO Northern Europe JTAG connector standard. An adapter to Multi-ICE pin-header is available.

    Pin

    Signal

    1

    VDD_FPGA_MIPI

    2

    GND

    3

    FPGA_JTAG_TMS

    4

    SWD_CLK

    5

    FPGA_JTAG_TCK

    6

    FPGA_JTAG_TDO

    7

    FPGA_JTAG_TDI

    8

    SWD_DIO

    1.2 Pin-Mux Information

    Several pins are GPIOs which may be configured for different functions by software.
    Please check with the processor datasheet for additional pin-mux information.
    An Excel-Sheet with pin-information is available at: https://documentation.seco.com/service/doku.php/service/hardware/module/sodimm200

    Notes:

     *3) FPGA_CIF_VSYNC, FPGA_CIF_HSYNC, FPGA_CIF_MCLK and FPGA_CIF_PCLK are connected to i.MX 8M Plus pins, if the FPGA is not mounted (RA72).

     *4) BT_PCM_IN, BT_PCM_OUT, BT_PCM_SYNC and BT_PCM_CLK are connected to the on-board BT-module if it is mounted!

     *5) PCIE_CLKREQ may not be usable when Wifi module is mounted.

    1.2.1  i.MX 8M Plus pins

    The i.MX 8M Plus pins got up to 10 different functions. Only the more common used are listed.

    PIN

    Name

    Alt0

    Alt1

    Alt2 / Alt3

    Alt5

    19

    UART3_RXD

    ecspi1.SCLK

    uart3.RX

     

    gpio5.IO[6]

    21

    UART3_TXD

    ecspi1_MOSI

    uart3.TX

     

    gpio5.IO[7]

    22

    SPIN22_RTS3

    ecspi1.MISO

    uart3.CTS_B

     

    gpio5.IO[8]

    23

    UART1_DTR

    sai5.RX_SYNC

    sai1.TX_DATA[0]

     

    gpio3.IO[19]

    24

    SPIN24_CTS3

    ecspi1.SS0

    uart3.RTS_B

     

    gpio5.IO[9]

    25

    UART1_CTS

    uart3.TX

    uart1.RTS_B

     

    gpio5.IO[27]

    27

    UART1_RTS

    uart3.RX

    uart1.CTS_B

     

    gpio5.IO[26]

    29

    UART1_DSR

    sai5.RX_BCLK

    sai1.TX_DATA[1]

     

    gpio3.IO[20]

    31

    UART1_DCD

    sai2.RX_SYNC

    sai5.TX_SYNC

    sai5.TX_DATA[1]

    gpio4.IO[21]

    32

    UART2_CTS

    uart4.TX

    uart2.RTS_B

     

    gpio5.IO[29]

    33

    UART1_RXD

    uart1.RX

    ecspi3.SCLK

     

    gpio5.IO[22]

    34

    UART2_RTS

    uart4.RX

    uart2.CTS_B

    pcie1.CLKREQ_B

    gpio5.IO[28]

    35

    UART1_TXD

    uart1.TX

    ecspi3.MOSI

     

    gpio5.IO[23]

    36

    UART2_RXD

    uart2.RX

    ecspi3.MISO

     

    gpio5.IO[24]

    37

    UART1_RI

    sai2.RX_BCLK

    sai5.TX_BCLK

     

    gpio4.IO[22]

    38

    UART2_TXD

    uart2.TX

    ecspi3.SS0

     

    gpio5.IO[25]

    43

    SPIN43

    gpio1.IO[7]

     

     

    usdhc1.WP

    45

    SPIN45

    rawnand.CE3_B

    qspi.B_SS1_B

     

    gpio3.IO[4]

    47

    SD2_CLK

    usdhc2.CLK

     

     

    gpio2.IO[13]

    49

    SAI1_RXD0

    sai1.RX_DATA[0]

    sai5.RX_DATA[0]

    sai1.TX_DATA[1]

    gpio4.IO[2]

    51

    SD2_DATA3

    usdhc2.DATA3

     

     

    gpio2.IO[18]

    53

    SAI1_RXD1

    sai1.RX_DATA[1]

    sai5.RX_DATA[1]

     

    gpio4.IO[3]

    55

    SPIN55

    sai5.RX_DATA[0]

    sai1.TX_DATA[2]

     

    gpio3.IO[21]

    57

    SAI1_RXD2

    sai1.RX_DATA[2]

    sai5.RX_DATA[2]

    enet1_MDC

    gpio4.IO[4]

    59

    SD2_DET

    usdhc2.CD_B

     

     

    gpio2.IO[12]

    61

    SAI1_RXD3

    sai1.RX_DATA[3]

    sai5.RX_DATA[3]

    enet1_MDIO

    gpio4.IO[5]

    63

    SAI1_RXD4

    sai1.RX_DATA[4]

    sai6.TX_BCLK

    enet1_RD0

    gpio4.IO[6]

    65

    SAI1_RXD5

    sai1.RX_DATA[5]

    sai6.TX_DATA[0]

    sai1.RX_SYNC
    enet1_RD1

    gpio4.IO[7]

    67

    SAI1_RXD6

    sai1.RX_DATA[6]

    sai6.TX_SYNC

    sai6.RX_SYNC
    enet1_RD2

    gpio4.IO[8]

    69

    LED_GPIO

    sai3.MCLK

    pwm4.OUT

    sai5.MCLK

    gpio5.IO[2]

    71

    SAI1_RXD7

    sai1.RX_DATA[7]

    sai6.MCLK

    sai1.TX_SYNC
    sai1.TX_DATA[4]
    enet1_RD3

    gpio4.IO[9]

    73

    SAI5_RXD1

    sai5.RX_DATA[1]

    sai1.TX_DATA[3]

    sai1.TX_SYNC
    sai5.TX_SYNC

    gpio3.IO[22]

    75

    SAI5_RXD2

    sai5.RX_DATA[2]

    sai1.TX_DATA[4]

    sai1.TX_SYNC
    sai5.TX_BCLK

    gpio3.IO[23]

    77

    BACKLIGHT_PWM

    gpio1.IO[1]

    pwm1.OUT

     

    anamix.REF_
    CLK_24M

    79

    SPIN79

    sai5.RX_DATA[3]

    sai1.TX_DATA[5]

    sai1.TX_SYNC
    sai5.TX_DATA[0]

    gpio3.IO[24]

    81

    SD2_DATA1

    usdhc2.DATA1

     

     

    gpio2.IO[16]

    85

    SD2_DATA2

    usdhc2.DATA2

     

     

    gpio2.IO[17]

    86

    CIF_VSYNC *3)

    ecspi2.SS0

    uart4.RTS_B

     

    gpio5.IO[13]

    87

    RESET_OUT

    gpio3.IO[14]

     

     

     

    88

    SAI1_MCLK

    CIF_MCLK *3)

    sai1.MCLK

    ecspi2.SCLK

    sai5.MCLK

    uart4.RX

    sai1.TX_BCLK

    gpio4.IO[20]

    gpio5.IO[10]

    90

    SAI1_RXC

    CIF_PCLK *3)

    sai1.RX_BCLK

    ecspi2.MISO

    sai5.RX_BCLK

    uart4.CTS_B

     

    gpio4.IO[1]

    gpio5.IO[12]

    92

    SAI1_RXFS

    CIF_HSYNC *3)

    sai1.RX_SYNC

    ecspi2.MOSI

    sai5.RX_SYNC

    uart4.TX

     

    gpio4.IO[0]

    gpio5.IO[11]

    93

    SPIN93

    rawnand.WP_B

     

     

    gpio3.IO[18]

    94

    I2C1_SCL

    i2c1.SCL

    enet1.MDC

     

    gpio5.IO[14]

    95

    SPIN95

    rawnand.READY_B

     

     

    gpio3.IO[16]

    96

    I2C1_SDA

    i2c1.SDA

    enet1.MDIO

     

    gpio5.IO[15]

    98

    SPIN98

    gpio1.IO[0]

    ccmsrcgpcmix.ENET_PHY_REF_CLK_ROOT

     

    anamix.REF_
    CLK_32K

    100

    DISPLAY_ENABLE

    gpio1.IO[5]

    m4.NMI

     

    ccmsrcgpcmix.PMIC_READY

    101

    SPIN101

    sai3.TX_SYNC

    gpt1.CAPTURE2

    sai5.RX_DATA[1]

    gpio4.IO[31]

    102

    AUDIO_ENABLE

    gpio1.IO[8]

    enet1.1588_
    EVENT0_IN

     

    usdhc2.RESET_
    B

    103

    SPIN103

    sai3.TX_BCLK

    gpt1.COMPARE2

    sai5.RX_DATA[2]

    gpio5.IO[0]

    104

    SPIN104

    rawnand.DATA05

    qspi.B_DATA[1]

     

    gpio3.IO[11]

    105

    QSPI_SCLK

    rawnand.ALE

    qspi.A_SCLK

     

    gpio3.IO[0]

    106

    SAI5_MCLK

    sai5.MCLK

    sai1.TX_BCLK

     

    gpio3.IO[25]

    107

    QSPI_SS0

    rawnand.CE0_B

    qspi.A_SS0_B

     

    gpio3.IO[1]

    110

    SAI1_TXD0

    sai1.TX_DATA[0]

    sai5.TX_DATA[0]

    enet1_TD0

    gpio4.IO[12]

    111

    QSPI_DATA0

    rawnand.DATA00

    qspi.A_DATA[0]

     

    gpio3.IO[6]

    112

    SAI1_TXD1

    sai1.TX_DATA[1]

    sai5.TX_DATA[1]

    enet1_TD1

    gpio4.IO[13]

    113

    QSPI_DATA1

    rawnand.DATA01

    qspi.A_DATA[1]

     

    gpio3.IO[7]

    114

    SAI1_TXD2

    sai1.TX_DATA[2]

    sai5.TX_DATA[2]

    enet1_TD2

    gpio4.IO[14]

    115

    PCIE_CLKREQ (*5)

    i2c4.SCL

    pwm2.OUT

    pcie1.CLKREQ_B

    gpio5.IO[20]

    116

    SAI1_TXD3

    sai1.TX_DATA[3]

    sai5.TX_DATA[3]

    enet1_TD3

    gpio4.IO[15]

    117

    QPSPI_DATA2

    rawnand.DATA02

    qspi.A_DATA[2]

     

    gpio3.IO[8]

    118

    SAI1_TXD4

    sai1.TX_DATA[4]

    sai6.RX_BCLK

    sai6.TX_BCLK
    enet1_TX_CTL

    gpio4.IO[16]

    119

    QSPI_DATA3

    rawnand.DATA03

    qspi.A_DATA[3]

     

    gpio3.IO[9]

    120

    SAI1_TXD5

    sai1.TX_DATA[5]

    sai6.RX_DATA[0]

    sai6.TX_DATA[0]
    enet1_TXC

    gpio4.IO[17]

    121

    SPIN121

    rawnand.DATA04

    qspi.B_DATA[0]

     

    gpio3.IO[10]

    122

    SAI1_TXD6

    sai1.TX_DATA[6]

    sai6.RX_SYNC

    sai6.TX_SYNC

    gpio4.IO[18]

    123

    CSI1_PWDN

    gpio1.IO[3]

    usdhc1.VSELECT

     

    sdma1.EXT_
    EVENT[0]

    124

    SAI1_TXD7

    sai1.TX_DATA[7]

    sai6.MCLK

     

    gpio4.IO[19]

    125

    CSI_RESET

    gpio1.IO[6]

    enet1.MDC

     

    usdhc1.CD_B

    126

    SAI1_TXFS

    sai1.TX_SYNC

    sai5.TX_SYNC

    enet1_RX_CTL

    gpio4.IO[10]

    127

    USB1_PEN

    gpio1.IO[12]

    usb1.OTG_PWR

     

    sdma2.EXT_
    EVENT[1]

    128

    SAI1_TXC

    sai1.TX_BCLK

    sai5.TX_BCLK

     

    enet1_rxc/gpio4.IO[11]

    129

    USB2_PEN

    gpio1.IO[14]

    usb2.OTG_PWR

     

    pwm3.OUT

    131

    USB2_OC

    gpio1.IO[15]

    usb2.OTG_OC

     

    pwm4.OUT

    132

    SPIN32

    rawnand.DATA06

    qspi.B_DATA[2]

     

    gpio3.IO[12]

    133

    USB1_OC

    gpio1.IO[13]

    usb1.OTG_OC

     

    pwm2.OUT

    134

    USB1_PD_INT

    rawnand.CE2_B

    qspi.B_SS0_B

     

    gpio3.IO[3]

    136

    USB1_SS_SEL

    rawnand.RE_B

    qspi.B_DQS

     

    gpio3.IO[15]

    146

    BT_PCM_IN *4)

    sai3.TX_DATA[0]

    gpt1.COMPARE3

    sai5.RX_DATA[3]

    gpio5.IO[1]

    154

    PCIE_WAKE

    rawnand.DATA07

    qspi.B_DATA[3]

     

    gpio3.IO[13]

    159

    SPDIF_IN

    spdif1.IN

    pwm2.OUT

     

    gpio5.IO[4]

    161

    SPDIF_OUT

    spdif1.OUT

    pwm3.OUT

     

    gpio5.IO[3]

    163

    SPDIF_EXT_CLK

    spdif1.EXT_CLK

    pwm1.OUT

     

    gpio5.IO[5]

    184

    BT_PCM_OUT *4)

    sai3.RX_DATA[0]

    gpt1.COMPARE1

    sai5.RX_DATA[0]

    gpio4.IO[30]

    186

    BT_PCM_CLK *4)

    sai3.RX_BCLK

    gpt1.CLK

    sai5.RX_BCLK

    gpio4.IO[29]

    188

    BT_PCM_SYNC *4)

    sai3.RX_SYNC

    gpt1.CAPTURE1

    sai5.RX_SYNC

    gpio4.IO[28]

    190

    SD2_CMD

    usdhc2.CMD

     

     

    gpio2.IO[14]

    192

    SD2_DATA0

    usdhc2.DATA0

     

     

    gpio2.IO[15]

    194

    I2C2_SDA

    i2c2.SDA

    enet1.1588_EVENT1_
    OUT

     

    gpio5.IO[17]

    196

    I2C2_SCL

    i2c2.SCL

    enet1.1588_EVENT1_
    IN

     

    gpio5.IO[16]

     

    1.2.2  Kinetis MCU pins

    Several pins are GPIOs which may be configured for different functions by software.
    Please check with the microcontroller datasheet for additional pin-mux information.

    PIN

    Name

    Alt0

    Alt1

    Alt2

    Alt3

    Alt4

    Alt5

    Alt6

    Alt7

    2

    VIN_AD3

    ADC0_SE7
    ADC1_SE7
    ADC1_DM1

    PTE19

    SPI0_SIN

    UART1_
    RTS

    I2C0_
    SCL

     

    SPI0_
    SOUT

     

    4

    VIN_AD2

    ADC0_SE6
    ADC1_SE1
    ADC1_DP1

    PTE18
    LLWI_P20

    SPI0_SOUT

    UART1_
    CTS

    I2C0_
    SDA

     

    SPI0_
    SIN

     

     

    6

    VIN_AD1

    ADC0_DM
    ADC0_SE5
    ADC1_SE5

    PTE17
    LLWI_P19

    SPI0_SCK

    UART1_
    RX

    FTM_
    CLKIN1

     

    LPTMR0_
    ALT3

     

    8

    VIN_AD0

    ADC0_SE1
    ADC0_DP
    ADC1_SE0

    PTE16

    SPI0_PCS0

    UART1_
    TX

    FTM_
    CLKIN0

     

    FTM_
    FLT3

     

    14

    TSPX

    ADC0_SE8
    ADC1_SE8

    PTB0
    LLWU_P5

    I2C0_SCL

    FTM1_
    CH0

     

     

    FTM1_
    QD_PHA

    UART0_
    RX

    16

    TSMX

    ADC0_SE9
    ADC1_SE9

    PTB1

    I2C0_SDA

    FTM1_
    CH1

    FTM0_
    FLT2

    EWM_
    IN

    FTM1_
    QD_PHB

    UART0_
    TX

    18

    TSPY

    ADC0_SE11
    CMP1_IN0

    PTC2

    SPI0_PCS2

    UART1_
    CTS

    FTM0_
    CH1

    FTM2_
    CH1

     

     

    20

    TSMY

    ADC1_SE4
    CMP1_IN4
    DAC0_OUT

    PTE30

     

    FTM0_
    CH3

     

    FTM_
    CLKIN1

     

     

    24

    SPIN24_
    CTS3

     

    PTA4
    LLWU_P3

     

    FTM0_
    CH1

    FTM4_
    FLT0

    FTM0_
    FLT3

     

    NMI_b

    26

    RESET_IN

     

    PTA20

     

     

     

     

     

    RESET

    97

    CAN1_RX

     

    PTE25
    LLWU_P21

    CAN0
    _RX

    FTM0_
    CH1

     

    I2C0_
    SDA

    EWM_
    IN

     

    99

    CAN1_TX

     

    PTE24

    CAN0
    _TX

    FTM0_
    CH0

     

    I2C0_
    SCL

    EWM_
    OUT

     

    *) Only MKV11 MCU, not usable with MKV10 MCU.

     ADC_SE          Single-Ended ADC
    ADC_DM/P      Differential ADC
    LLWU              Wakeup-Sources
    EWM               External Watchdog Monitor
    FTM                 Flexible Timer Module
    FTM_CH          Output Channel
    FTM_FLT         Fault
    FTM_QD_PH   Quadrature Decoder

     

    1.3 Electrical Pin-Information

    PI:

    Power Input

     

    DO:

    Digital Output

    PO:

    Power Output

     

    DIO:

    Digital Input/Output

     

     

     

    DDI:

    Differential Input

    AI:

    Analog Input

     

    DDO:

    Differential Output

    AO:

    Analog Output

     

    DDIO:

    Differential Input/Output

     

     

     

     

     

    DI:

    Digital Input

     

    OD

    Open-Drain Output

     

     

     

     

     

    PD:

    Pull-Down

    (PDp: Pull-Down, Pull-behavior can be changed by software)

    PU:

    Pull-Up

    PUp: Pull-Up, Pull-behavior can be changed by software

    If two “types” are specified, the first value determines the type of primary

     

    SODIMM

    PIN

    Name

    Type

    Voltage

    Connected to

    1

    AUDIO_MIC_OUT

    AI

     

    Audio-Codec

    3

    AUDIO_MIC_GND

    AI

     

    Audio-Codec

    5

    AUDIO_LINEIN_L

    AI

     

    Audio-Codec

    7

    AUDIO_LINEIN_R

    AI

     

    Audio-Codec

    9

    AUDIO_AGND

    Analog Audio
    Ground 

     

    Audio-Codec and VREF-
    of Kinetis MCU

    11

    AUDIO_AGND

    13

    AUDIO_HEADPHONE_GND

    AI

     

    Audio-Codec

    15

    AUDIO_HEADPHONE_L

    AO

     

    Audio-Codec

    17

    AUDIO_HEADPHONE_R

    AO

     

    Audio-Codec

    19

    UART3_RXD

    DI, DIO

    NVCC_3V3

    i.MX8M and
    BT-module, if no FPGA (RA600)

    21

    UART3_TXD

    DO, DIO

    NVCC_3V3

    SPI1_CLK

    23

    UART1_DTR

    DO, DIO

    NVCC_3V3

    i.MX8M

    25

    UART1_CTS

    DI, DIO

    NVCC_3V3

    i.MX8M

    27

    UART1_RTS

    DO, DIO

    NVCC_3V3

    i.MX8M

    29

    UART1_DSR

    DI, DIO

    NVCC_3V3

    i.MX8M

    31

    UART1_DCD

    DI, DIO

    NVCC_3V3

    i.MX8M

    33

    UART1_RXD

    DI, DIO

    NVCC_3V3

    i.MX8M

    35

    UART1_TXD

    DO, DIO

    NVCC_3V3

    i.MX8M

    37

    UART1_RI

    DI, DIO

    NVCC_3V3

    i.MX8M

    39

    GND

    Ground

    41

    GND

    43

    SPIN43

    DIO

    NVCC_3V3

    i.MX8M

    45

    SPIN45

    DIO

    NVCC_3V3

    i.MX8M

    47

    SD2_CLK

    DO, DIO

    NVCC_3V3

    i.MX8M

    49

    CIF_D0

    DI, DIO

    NVCC_3V3

    i.MX8M

    51

    SD2_DATA3

    DIO

    NVCC_3V3

    i.MX8M

    53

    CIF_D1

    DI, DIO

    NVCC_3V3

    i.MX8M

    55

    SPIN55

    DIO

    NVCC_3V3

    i.MX8M

    57

    SAI1_RXD2

    DI, DIO

    NVCC_3V3

    i.MX8M

    59

    SD2_DET

    DI, DIO

    NVCC_3V3

    i.MX8M

    61

    SAI1_RXD3

    DI, DIO

    NVCC_3V3

    i.MX8M

    63

    SAI1_RXD4

    DI, DIO

    NVCC_3V3

    i.MX8M

    65

    SAI1_RXD5

    DI, DIO

    NVCC_3V3

    i.MX8M

    67

    SAI1_RXD6

    DI, DIO

    NVCC_3V3

    i.MX8M

    69

    LED_GPIO, PWM4

    DO, DIO

    NVCC_3V3

    i.MX8M

    71

    SAI1_RXD7

    DI, DIO

    NVCC_3V3

    i.MX8M

    73

    CIF_D8

    DI, DIO

    NVCC_3V3

    i.MX8M

    75

    CIF_D9

    DI, DIO

    NVCC_3V3

    i.MX8M

    77

    BACKLIGHT_PWM

    DO, DIO

    NVCC_3V3

    i.MX8M

    79

    SPIN79

    DI, DIO

    NVCC_3V3

    i.MX8M

    81

    SD2_DATA1

    DIO

    NVCC_3V3

    i.MX8M

    83

    GND

    Ground 

    85

    SD2_DATA2

    DIO

    NVCC_3V3

    i.MX8M

    87

    RESET_OUT

    DO

    NVCC_3V3

    FPGA + i.MX8M + Kinetis MCU

    89

    +3V3_AUX (NVCC_3V3)

    PO

    +3V3

    NVCC_3V3

    91

    +3V3_AUX (NVCC_3V3)

    93

     -

     

     

     

    95

    SPIN95

    DIO

    NVCC_3V3

    i.MX8M

    97

    CAN1_RX

    DI, DIO

    NVCC_3V3

    i.MX8M

    99

    CAN1_TX

    DO, DIO

    101

    CAN2_RX

    DI, DIO

    NVCC_3V3

    i.MX8M

    103

    CAN2_TX

    DO, DIO

    105

    QSPI_SCLK (CS1)

    DO, DIO

    NVCC_3V3

    i.MX8M

    107

    QSPI_SS0 ( CS3)

    DO, DIO

    NVCC_3V3

    i.MX8M

    109

    GND

    Ground 

    111

    QSPI_DATA0 (A00)

    DIO

    NVCC_3V3

    i.MX8M

    113

    QSPI_DATA1 (A01)

    DIO

    NVCC_3V3

    i.MX8M

    115

    PCIE_CLKREQ

    DIO

    NVCC_3V3

    i.MX8M

    117

    QPSPI_DATA2 (A03)

    DIO

    NVCC_3V3

    i.MX8M

    119

    QSPI_DATA3 (A04)

    DIO

    NVCC_3V3

    i.MX8M

    121

    SPIN121 (A05)

    DIO

    NVCC_3V3

    i.MX8M

    123

    CSI1_PWDN

    DO, DIO

    NVCC_3V3

    i.MX8M

    125

    CSI_RESET

    DO, DIO

    NVCC_3V3

    i.MX8M

    127

    USB1_PEN

    DO, DIO

    NVCC_3V3

    i.MX8M

    129

    USB2_PEN

    DO, DIO

    NVCC_3V3

    i.MX8M

    131

    USB2_OC

    DI, DIO

    NVCC_3V3

    i.MX8M

    133

    USB1_OC

    DI, DIO

    NVCC_3V3

    i.MX8M

    135

    USB1_VBUS

    DI (PO)

    +5V

    i.MX8M

    137

    USB1_ID

    DI

    NVCC_3V3

    i.MX8M

    139

    USB1_DP

    DDIO

    NVCC_3V3

    i.MX8M

    141

    USB1_DN

    DDIO

    NVCC_3V3

    i.MX8M

    143

    USB2_DP

    DDIO

    NVCC_3V3

    i.MX8M

    145

    USB2_DN

    DDIO

    NVCC_3V3

    i.MX8M

    147

    GND

    Ground

    149

    HDMI_DDC_SDA

    DIO

    NVCC_3V3

    i.MX8M

    151

    USB2_TX_P

    DDIO

    NVCC_3V3

    i.MX8M

    153

    USB2_TX_N

    DDIO

    NVCC_3V3

    i.MX8M

    155

    USB2_RX_P

    DDIO

    NVCC_3V3

    i.MX8M

    157

    USB2_RX_N

    DDIO

    NVCC_3V3

    i.MX8M

    159

    SPDIF_IN

    DI, DIO

    NVCC_3V3

    i.MX8M

    161

    SPDIF_OUT

    DO, DIO

    NVCC_3V3

    i.MX8M

    163

    SPDIF_EXT_CLK

    DI, DIO

    NVCC_3V3

    i.MX8M

    165

    LED_WL

    DO

    NVCC_3V3

    Wifi

    167

    LED_BT

    DO

    NVCC_3V3

    BT

    169

    VDD_ENET_IO

    PO

    Ethernet signal
    IO voltage

     

    171

    ETH_LED_SPEED1000

    OD

    NVCC_3V3

    Gbit Ethernet-Phy

    173

    ETH_TRX2_N

    DDIO

    VDD_ENET_IO

    Gbit Ethernet-Phy

    175

    ETH_TRX2_P

    DDIO

    VDD_ENET_IO

    Gbit Ethernet-Phy

    177

    ETH_TRX3_N

    DDIO

    VDD_ENET_IO

    Gbit Ethernet-Phy

    179

    ETH_TRX3_P

    DDIO

    VDD_ENET_IO

    Gbit Ethernet-Phy

    181

    GND

    Ground

    183

    ETH_LED_LINK_AKT

    OD

    NVCC_3V3

    Gbit Ethernet-Phy

    PIN

    Name

    Type

    Voltage

    Connected to

    185

    ETH_LED_SPEED100

    OD

    NVCC_3V3

    Gbit Ethernet-Phy

    187

    ETH_TRX0_N

    DDIO

    VDD_ENET_IO

    Gbit Ethernet-Phy

    189

    ETH_TRX0_P

    DDIO

    VDD_ENET_IO

    Gbit Ethernet-Phy

    191

    ETH_GND

    Ground

    193

    ETH_TRX1_N

    DDIO

    VDD_ENET_IO

    Gbit Ethernet-Phy

    195

    ETH_TRX1_P

    DDIO

    VDD_ENET_IO

    Gbit Ethernet-Phy

    197

    GND

    Ground

    199

    GND

    2

    VIN_AD3

    AI, DIO

    VCC_SNVS

    Kinetis MCU, PTE16: ADC0_SE1

    4

    VIN_AD2

    AI, DIO

    VCC_SNVS

    Kinetis MCU, PTE17: ADC0_SE5

    6

    VIN_AD1

    AI, DIO

    VCC_SNVS

    Kinetis MCU, PTE18: ADC0_SE6

    8

    VIN_AD0

    AI, DIO

    VCC_SNVS

    Kinetis MCU, PTE19: ADC0_SE7

    10

    AUDIO_VDDA

    PI

    AUDIO_VDD

    Audio-Codec and VREF+
    of Kinetis MCU

    12

    AUDIO_VDD_SPEAKER

    PI

    VDD_SPEAKER

    Audio-Codec and VREF+
    of Kinetis MCU

    14

    TSPX

    AI, DIO

    VCC_SNVS

    Kinetis MCU, PTB0: ADC1_SE8

    16

    TSMX

    AI, DIO

    VCC_SNVS

    Kinetis MCU, PTB1: ADC1_SE9

    18

    TSPY

    AI, DIO

    VCC_SNVS

    Kinetis MCU, PTC2: ADC0_SE11, CMP1_IN0

    20

    TSMY

    AI, DIO

    VCC_SNVS

    Kinetis MCU, PTE30: ADC1_SE4,  CMP1_IN4

    22

    SPIN22_RTS3

    DO, DIO

    NVCC_3V3

    i.MX8M and
    BT module,
    if no FPGA (RA600)

    24

    SPIN24_CTS3

    DI, DIO

    NVCC_3V3
    VCC_SNVS

    Kinetis MCU, i.MX8M and
    BT module,
    if no FPGA (RA600)
    optional ONOFF (R627),
    optional BOOT_MODE0 (R628)

    26

    RESET_IN

    DI

    VCC_SNVS

    Kinetis MCU and Reset-Circuit

    28

    SPEAKER_P

    AO

    VDD_SPEAKER

    Audio-Codec

    30

    SPEAKER_N

    AO

    32

    UART2_CTS

    DI, DIO

    NVCC_3V3

    i.MX8M

    34

    UART2_RTS

    DO, DIO

    NVCC_3V3

    i.MX8M

    36

    UART2_RXD

    DI, DIO

    NVCC_3V3

    i.MX8M

    38

    UART2_TXD

    DO, DIO

    NVCC_3V3

    i.MX8M

    40

    VSYS

    PI

    +3V3/+5V

    42

    VSYS

    44

    LCD_DE

    DO, DIO

    NVCC_3V3

    FPGA

    46

    LCD_D07

    DO, DIO

    NVCC_3V3

    FPGA

    48

    LCD_D09

    DO, DIO

    NVCC_3V3

    FPGA

    50

    LCD_D11

    DO, DIO

    NVCC_3V3

    FPGA

    52

    LCD_D12

    DO, DIO

    NVCC_3V3

    FPGA

    54

    LCD_D13

    DO, DIO

    NVCC_3V3

    FPGA

    56

    LCD_PCLK

    DO, DIO

    NVCC_3V3

    FPGA

    58

    LCD_D03

    DO, DIO

    NVCC_3V3

    FPGA

    60

    LCD_D02

    DO, DIO

    NVCC_3V3

    FPGA

    62

    LCD_D08

    DO, DIO

    NVCC_3V3

    FPGA

    64

    LCD_D15

    DO, DIO

    NVCC_3V3

    FPGA

    66

    LCD_D14

    DO, DIO

    NVCC_3V3

    FPGA

    68

    LCD_HSYNC

    DO, DIO

    NVCC_3V3

    FPGA

    70

    LCD_D01

    DO, DIO

    NVCC_3V3

    FPGA

    72

    LCD_D05

    DO, DIO

    NVCC_3V3

    FPGA

    74

    LCD_D10

    DO, DIO

    NVCC_3V3

    FPGA

    76

    LCD_D00

    DO, DIO

    NVCC_3V3

    FPGA

    78

    LCD_D04

    DO, DIO

    NVCC_3V3

    FPGA

    80

    LCD_D06

    DO, DIO

    NVCC_3V3

    FPGA

    82

    LCD_VSYNC

    DO, DIO

    NVCC_3V3

    FPGA

    84

    VSYS

    PI

    +3V3/+5V

    86

    CIF_VSYNC
    SPI2_SS0

    DO, DIO

    NVCC_3V3

    FPGA,
    RA3 optional route to i.MX8M SPI2_SS0

    88

    CIF_MCLK
    SPI2_SCLK

    DO, DIO

    NVCC_3V3

    FPGA,
    RA3 optional route to i.MX8M SPI2_SCLK

    90

    CIF_PCLK
    SPI2_MISO

    DO, DIO

    NVCC_3V3

    FPGA,
    RA3 optional route to i.MX8 SPI2_MISO

    92

    CIF_HSYNC
    SPI2_MOSI

    DO, DIO

    NVCC_3V3

    FPGA,
    RA3 optional route to i.MX8 SPI2_MOSI

    94

    I2C1_SCL

    DO, DIO

    NVCC_3V3

    i.MX8M

    96

    I2C1_SDA

    DO, DIO

    NVCC_3V3

    i.MX8M

    98

    SPIN98

    DIO

    NVCC_3V3

    i.MX8M

    100

    DISPLAY_ENABLE

    DO, DIO

    NVCC_3V3

    i.MX8M

    102

    AUDIO_ENABLE

    DO, DIO

    NVCC_3V3

    i.MX8M

    104

    SPIN104

    DIO

    NVCC_3V3

    i.MX8M

    106

    VSD_3V3

    PO

    +3V3 (switchable)

    108

    VSYS

    PI

    +3V3/+5V

    110

    SAI1_TXD0

    DO, DIO

    NVCC_3V3

    i.MX8M

    112

    SAI1_TXD1

    DO, DIO

    NVCC_3V3

    i.MX8M

    114

    SAI1_TXD2

    DO, DIO

    NVCC_3V3

    i.MX8M

    116

    SAI1_TXD3

    DO, DIO

    NVCC_3V3

    i.MX8M

    118

    SAI1_TXD4

    DO, DIO

    NVCC_3V3

    i.MX8M

    120

    SAI1_TXD5

    DO, DIO

    NVCC_3V3

    i.MX8M

    122

    SAI1_TXD6

    DO, DIO

    NVCC_3V3

    i.MX8M

    124

    SAI1_TXD7

    DO, DIO

    NVCC_3V3

    i.MX8M

    126

    SAI1_TXFS

    DO, DIO

    NVCC_3V3

    i.MX8M

    128

    SAI1_TXC

    DO, DIO

    NVCC_3V3

    i.MX8M

    130

    HDMI_DDC_SCL

    DO,DIO

    NVCC_3V3

    i.MX8M

    132

     -

     

     

     

    134

    SPIN134

    DIO

    NVCC_3V3

    i.MX8M

    136

    SPIN136

    DIO

    NVCC_3V3

    i.MX8M

    138

    USB1_RX_P

    DDIO

    NVCC_3V3

    i.MX8M

    140

    USB1_RX_N

    DDIO

    NVCC_3V3

    i.MX8M

    142

    USB1_TX_P

    DDIO

    NVCC_3V3

    i.MX8M

    144

    USB1_TX_N

    DDIO

    NVCC_3V3

    i.MX8M

    146

    BT_PCM_IN

    DI, DIO

    NVCC_3V3

    i.MX8M and BT-Module

    148

    VSYS

    PI

    +3V3/+5V

    150

    LCD_D16

    DO, DIO

    NVCC_3V3

    FPGA

    152

    LCD_D17

    DO, DIO

    NVCC_3V3

    FPGA

    154

    PCIE_WAKE

    DO, DIO

    NVCC_3V3

    i.MX8M

    156

    VDD_FPGA_MIPI

    PO

    +2V5 (programmable)

    158

    PCIE_REFCLK_N

    DDO

    NVCC_3V3

    i.MX8M

    160

    PCIE_REFCLK_P

    DDO

    NVCC_3V3

    i.MX8M

    162

    PCIE_TXN_P

    DDO

    NVCC_3V3

    i.MX8M

    164

    PCIE_TXN_N

    DDO

    NVCC_3V3

    i.MX8M

    166

    PCIE_RXN_P

    DDI

    NVCC_3V3

    i.MX8M

    168

    PCIE_RXN_N

    DDI

    NVCC_3V3

    i.MX8M

    170

    LCD_D21
    SD3_DATA0

    DO, DIO

    NVCC_3V3

    FPGA and i.MX8M

    172

    LCD_D20
    SD3_DATA1

    DO, DIO

    NVCC_3V3

    FPGA and i.MX8M

    174

    LCD_D19
    SD3_DATA2

    DO, DIO

    NVCC_3V3

    FPGA and i.MX8M

    176

    LCD_D18
    SD3_DATA3

    DO, DIO

    NVCC_3V3

    FPGA and i.MX8M

    178

    LCD_D23
    SD3_CLK

    DO, DIO

    NVCC_3V3

    FPGA and i.MX8M

    180

    LCD_D22
    SD3_CMD

    DO, DIO

    NVCC_3V3

    FPGA and i.MX8M

    182

    VSYS

    PI

    +3V3/+5V

    184

    BT_PCM_OUT

    DO, DIO

    NVCC_3V3

    i.MX8M and BT-Module

    186

    BT_PCM_CLK

    DO, DIO

    NVCC_3V3

    i.MX8M and BT-Module

    188

    BT_PCM_SYNC

    DO, DIO

    NVCC_3V3

    i.MX8M and BT-Module

    190

    SD2_CMD

    DO, DIO

    NVCC_3V3

    i.MX8M

    192

    SD2_DATA0

    DIO

    NVCC_3V3

    i.MX8M

    194

    I2C2_SDA

    DIO

    NVCC_3V3

    i.MX8M

    196

    I2C2_SCL

    DIO

    NVCC_3V3

    i.MX8M

    198

    VSYS

    PI

    +3V3/+5V

    200

    VCC_SNVS

    PI

    +3V3 (Must be applied first)

     
    2 Interfaces

    This chapter includes a short description of all interfaces of the Trizeps VIII Plus.
    Please consult the processor datasheet for detailed information.

    2.1      Power Supply

    The Trizeps VIII Plus can be supplied by a single +3V3/+5V power-supply.
    But it is possible to supply parts of the modules separately.

    Name

    Description

    +3V3_SNVS

    +3V3 power input. This supply powers the Kinetis MCU. The Kinetis
    MCU controls reset and power to the i.MX8M processor and may be programmed by customers.

    VSYS

    Main power input.

    +3V3_AUX (NVCC_3V3)

    +3V3 output.
    NVCC_3V3 is the IO-voltage for several peripherals of the i.MX8M Plus.
    State of GPIO-pins is undefined until +3V3_AUX is available!

    AUDIO_VDD

    +3V3 power input for audio.
    Also used as reference-voltage for ADC of Kinetis MCU.

    AUDIO_VDD_SPEAKER

    +3V3 or +5V power input for audio speaker.

    AUDIO_AGND

    Analog GND.

    VDD_ENET_IO

    +2V5 power output. Ethernet signal IO voltage.

    VDD_FPGA_MIPI

    +2V5 power output. Voltage is programmable and supplies
    the MIPI IO-banks of the FPGA.

    VSD_3V3

    SD signal IO voltage powerout. ON/OFF Switchable

     

    2.2      Control-Signals

    Name

    Description

    RESET_IN

    Negated reset input. 0: reset device, 1: normal operation.

    RESET_OUT

    Negated reset output. 0: device in reset, 1: normal operation.

    SPIN24_CTS3

    Is connected to the programmable Kinetis MCU.
    i.e. may be used to control ONOFF or BOOT_MODE-pin of i.MX8M.

     

    2.3      UART

    The i.MX8M provides 4 Universal Asynchronous Receiver/Transmitter. With a transceiver these signals can be converted to RS232, RS485 or IrDA.
    The SODIMM200 standard defines 3 UART ports, but all 4 UARTs are accessible through the SODIMM200 connector if needed.

    Name

    Description

    UART1_TXD

    UART1 transmit output

    UART1_RXD

    UART1 receive input

    UART1_RTS

    UART1 request to send output

    UART1_CTS

    UART1 clear to send input

    UART1_DTR

    UART1 data terminal ready output;
    A GPIO is used to emulate this function.

    UART1_DSR

    UART1 data set ready input;
    A GPIO is used to emulate this function.

    UART1_DCD

    UART1 data carrier detect input;
    A GPIO is used to emulate this function.

    UART1_RI

    UART1 ring indicator input;
    A GPIO is used to emulate this function.

    UART2_TXD

    UART2 transmit output

    UART2_RXD

    UART2 receive input

    UART2_RTS

    UART2 request to send output.
    This pin can be configured to be UART4_RXD.

    UART2_CTS

    UART2 clear to send input.
    This pin can be configured to be UART4_TXD.

    UART3_TXD

    UART3 transmit output;
    This signal is routed through the FPGA.
    If Trizeps module is without FPGA, there is a mounting option to either route UART3 to the SODIMM or to the BT-module. 

    UART3_RXD

    UART3 receive input;
    This signal is routed through the FPGA.
    If Trizeps module is without FPGA, there is a mounting option to either route UART3 to the SODIMM or to the BT-module.

    SPIN22_RTS3

    UART3 request to send output;
    This signal is routed through the FPGA.
    If Trizeps module is without FPGA, there is a mounting option to either route UART3 to the SODIMM or to the BT-module.
    The SODIMM200-standard does not specify a RTS-pin for UART3.

    SPIN24_CTS3

    UART3 clear to send input;
    This signal is routed through the FPGA.
    If Trizeps module is without FPGA, there is a mounting option to either route UART3 to the SODIMM or to the BT-module.
    The SODIMM200-standard does not specify a CTS-pin for UART3.

    UART1_DSR

    UART1 data set ready input;
    A GPIO is used to emulate this function.

     Baudrate:             High-speed TIA/EIA-232-F compatible, up to 1Mbit/s
                                IrDA-compatible, up to 115.2 Kbit/s
    Data-Bits:             7 or 8 bits (RS232) or 9 bit (RS485)
    Stop-Bits:             1, 2
    Parity:                   None, Even, Odd
    Features:              Hardware-flow-control (RTS,CTS)

    2.4      SPI

    The serial peripheral interface is a programmable synchronous serial port, which may be used to connect to a multiple of different peripherals.
    The i.MX8M features an Enhanced Configurable SPI (ECSPI).
    The ECSPI2 is routed to the Kinetis MCU and to the FPGA.
    The FPGA allows to route these signals to pins, that carried the SPI pins on previous Trizeps SODIMM200 modules. If no FPGA is mounted, there is a mounting option to route these signals to FPGA_CIF_VSYNC, FPGA_CIF_HSYNC, FPGA_CIF_MCLK and FPGA_CIF_PCLK.

    Name

    Description

    SPI2_SS0

    SPI2 Slave Select

    SPI2_SCLK

    SPI2 Clock

    SPI2_MISO

    SPI2 Master In Slave Out

    SPI2_MOSI

    SPI2 Master Out Slave I

    Speed: up to 52Mbit/s
    Features:         Master & Slave mode

     

    2.5      QSPI

    The Quad Serial Peripheral Interface (QuadSPI) is a synchronous serial port with up to four bidirectional data lines to interface with external serial flash devices.
    This interface is not part of the SODIMM200 standard.

    Name

    Description

    QSPI_SS0

    Quad SPI Slave Select

    QSPI_SCLK

    Quad SPI Clock

    QSPI_DATA0

    Quad SPI Data0

    QSPI_DATA1

    Quad SPI Data1

    QSPI_DATA2

    Quad SPI Data2

    QSPI_DATA3

    Quad SPI Data3

    Speed: up to 50MHz
    Features:         Master only.

     

    2.6      I2C

    The Inter-Integrated Circuit (I2C) provides functionality of a standard I2C master and slave.

    Name

    Description

    I2C2_SCL

    Primary I2C; Clock

    I2C2_SDA

    Primary I2C; Data

    I2C1_SCL

    Secondary I2C; Clock

    I2C1_SDA

    Secondary I2C; Data

    Speed: Standard mode, up to 100 kbit/s
                           Fast mode, up to 400 kbit/s
    Features:        Multimaster operation.
                           I2C Bus Specification Version 2.1

     

    2.7      I2S

    The Inter-IC sound interface provides a synchronous audio interface (SAI) and is used to connect to audio codecs.
    This interface is not part of the SODIMM200 standard.

    Name

    Description

    SAI1_TXC

    Transmit Bit Clock

    SAI1_TXFS

    Transmit Frame Sync

    SAI1_TXD0

    Serial transmit data channel 0

    SAI1_TXD1

    Serial transmit data channel 1

    SAI1_TXD2

    Serial transmit data channel 2

    SAI1_TXD3

    Serial transmit data channel 3

    SAI1_TXD4

    Serial transmit data channel 4

    SAI1_TXD5

    Serial transmit data channel 5

    SAI1_TXD6

    Serial transmit data channel 6

    SAI1_TXD7

    Serial transmit data channel 7

    SAI1_RXC

    Receive Bit Clock

    SAI1_RXFS

    Receive Frame Sync

    SAI1_MCLK

    Audio Master Clock

    SAI1_RXD0

    Serial receive data channel 0

    SAI1_RXD1

    Serial receive data channel 1

    SAI1_RXD2

    Serial receive data channel 2

    SAI1_RXD3

    Serial receive data channel 3

    SAI1_RXD4

    Serial receive data channel 4

    SAI1_RXD5

    Serial receive data channel 5

    SAI1_RXD6

    Serial receive data channel 6

    SAI1_RXD7

    Serial receive data channel 7

    BT_PCM_CLK

    BT PCM clock (SAI3_RXC)
    Optional connected to BT-module.

    BT_PCM_SYNC

    BT PCM Sync (SAI3_RXFS)
    Optional connected to BT-module.

    BT_PCM_IN

    BT PCM In (SAI3_TXD)
    Optional connected to BT-module.

    BT_PCM_OUT

    BT PCM Out (SAI3_RXD)
    Optional connected to BT-module.

     

    2.8      SD-Card

    The SD-Card Interface may be used to connect a SD-Card, eMMC or SDIO-hardware to the Trizeps module.

    Name

    Description

    SD2_CMD

    SD-card command output

    SD2_CLK

    SD-card clock output

    SD2_DAT0

    SD-card data bit 0

    SD2_DAT1

    SD-card data bit 1

    SD2_DAT2

    SD-card data bit 2

    SD2_DAT3

    SD-card data bit 3

    SD2_DET

    SD-card detect: 1: card inserted, 0: card removed

    Speed: Card bus clock frequency up to 208 MHz
    Features:        Conforms to the SD Host Controller Standard Specification version 3.0
    Compatible with the MMC System Specification version 4.2/4.3/4.4/4.41/5.0
    Compatible with the SD Memory Card Specification version 3.0 and supports the Extended
    Capacity SD Memory Card
    Compatible with the SDIO Card Specification version 3.0

     

    2.9      USB

    The Trizeps VIII Plus got two super-speed USB 3.0 ports (1 x OTG, 1 x Host).

    Name

    Description

    USB1_DP

    USB1 Data Plus

    USB1_DN

    USB1 Data Negative

    USB1_RX_P

    USB1 Receive Data Plus

    USB1_RX_N

    USB1 RecieveData Negative

    USB1_TX_P

    USB1 Transmit Data Plus

    USB1_TX_N

    USB1 Transmit Data Negative

    USB1_PEN

    USB1 Power Enable output

    USB1_OC

    USB1 Overcurrent Detect input

    USB1_VBUS

    USB1 VBUS (+5V)

    USB1_ID

    USB1 ID Detect

    USB2_DP

    USB2 Data Plus

    USB2_DN

    USB2 Data Negative

    USB2_RX_P

    USB2 Receive Data Plus

    USB2_RX_N

    USB2 RecieveData Negative

    USB2_TX_P

    USB2 Transmit Data Plus

    USB2_TX_N

    USB2 Transmit Data Negative

    USB2_PEN

    USB2 Power Enable output

    USB2_OC

    USB2 Overcurrent Detect input

    Speed: Super-speed   4 Gbit/s
    High-speed      480 Mbit/s
    Full-speed       12 Mbit/s
    Low-speed      1.5 Mbit/s
    Features:     Complies with USB specification rev 3.0 (xHCI compatible)

     

    2.10   PCIe

    The i.MX8M Plus features one PCI Express dual mode (DM) controller.
    The PCIe port is connected to the internal Wireless module.
    On modules without Wireless the signals are available on the SODIMM200 connector.

    Name

    Description

    PCIE_REFCLK_N

    PCIE Clock (negative)

    PCIE_REFCLK_P

    PCIE Clock (positive)

    PCIE_TXN_N

    PCIE Transmit Data (negative)

    PCIE_TXN_P

    PCIE Transmit Data (positive)

    PCIE_RXN_N

    PCIE Receive Data (negative)

    PCIE_RXN_P

    PCIE Receive Data (positive)

    PCIE_WAKE

     

    PCIE_CLKREQ

     

    Speed: 1.5 / 2.5 / 3.0 / 5.0 / 6.0 Gbps
    Features:         PCIe specification Gen2 x1 lane
                           PCI Express 1.1/2.0 standard
                           PCI Express Base Specification, Revision 4.0, Version 0.7
                           PIPE Specification for PCI Express, Version 4.3
                           PCI Local Bus Specification, Revision 3.0
                           PCI Bus Power Management Specification, Revision 1.2

     

    2.11   Ethernet

    The Trizeps VIII Plus uses an Realtek RTL8211 integrated 10/100/1000 Mbps Ethernet Transceiver to interface with the i.MX8M Plus RGMII.

    Name

    Description

    ETH_TRX0_N

    Ethernet0 Transmit/Receive Data 0 (negative)

    ETH_TRX0_P

    Ethernet0 Transmit/Receive Data 0 (positive)

    ETH_TRX1_N

    Ethernet0 Transmit/Receive Data 1 (negative)

    ETH_TRX1_P

    Ethernet0 Transmit/Receive Data 1 (positive)

    ETH_TRX2_N

    Ethernet0 Transmit/Receive Data 2 (negative)

    ETH_TRX2_P

    Ethernet0 Transmit/Receive Data 2 (positive)

    ETH_TRX3_N

    Ethernet0 Transmit/Receive Data 3 (negative)

    ETH_TRX3_P

    Ethernet0 Transmit/Receive Data 3 (positive)

    ETH_LED_LINK_AKT

    LED output for 10/100/1000 BASE-T activity

    ETH_LED_SPEED100

    LED output for 10 / 100 BASE-T link

    ETH_LED_SPEED1000

    LED output for 1000 BASE-T link

    VDD_ENET_IO

    +2V5 IO-voltage output.

     An additional 10/100/1000 Mbps Ethernet interface is accessible via RGMII signals, routed directly to the SODIMM200.

    Name

    Description

    ENET1_TX_CTL

    Ethernet1 Transmit Control

    ENET1_TXC

    Ethernet1 Transmit Clock

    ENET1_TD0

    Ethernet1 Transmit Data 0

    ENET1_TD1

    Ethernet1 Transmit Data 1

    ENET1_TD2

    Ethernet1 Transmit Data 2

    ENET1_TD3

    Ethernet1 Transmit Data 3

    ENET1_RX_CTL

    Ethernet1 Receive Control

    ENET1_RXC

    Ethernet1 Receive Clock

    ENET1_RD0

    Ethernet1 Receive Data 0

    ENET1_RD1

    Ethernet1 Receive Data 1

    ENET1_RD2

    Ethernet1 Receive Data 2

    ENET1_RD3

    Ethernet1 Receive Data 3

     

    2.12   CAN

    The CAN interface of The Trizeps VIII Plus supports 2 x CAN FD.

    Name

    Description

    CAN1_RX

    CAN1 Receive Data

    CAN1_TX

    CAN1 Transmit Data

    CAN2_RX

    CAN2 Receive Data

    CAN2_TX

    CAN2 Transmit Data

     

    2.13   Display

    The i.MX8M processor has this display interfaces:

    • DSI-MIPI (4ch)

    • Dual Channel LVDS

    The DSI-MIPI interface can be converted to parallel RGB Display ( through on board FPGA)

    Name

    Description

    DISPLAY_ENABLE

    This GPIO is typical used to control the display-enable
    signal of an attached display.

    BACKLIGHT_PWM

    This GPIO is capable of generating a PWM and is typical
    used to generate the backlight PWM signal.

     2.13.1   DSI-MIPI (4ch)

    The DSI-MIPI signals are routed to an FPGA and to the B2B-connector.

    Name

    Description

    MIPI_DSI_CLK_P

    DSI Clock (positive)

    MIPI_DSI_CLK_N

    DSI Clock (negative)

    MIPI_DSI_D0_P

    DSI Data 0 (positive)

    MIPI_DSI_D0_N

    DSI Data 0 (negative)

    MIPI_DSI_D1_P

    DSI Data 1 (positive)

    MIPI_DSI_D1_N

    DSI Data 1 (negative)

    MIPI_DSI_D2_P

    DSI Data 2( positive)

    MIPI_DSI_D2_N

    DSI Data 2( negative)

    MIPI_DSI_D3_P

    DSI Data 3( positive)

    MIPI_DSI_D3_N

    DSI Data 3( negative)

    Speed: Support 80Mbps – 1.5Gbps data rate in high speed operation
                            Support 10Mbps data rate in low power operation.
    Features:         Compliant to MIPI-DSI standard v1.2

     

    2.13.2  Single-/Dual LVDS

    The Trizeps VIII Plus supports Single- and Dual-LVDS up to FullHD (1080p)

    Name

    Description

    LVDS0_CLK_P

    Channel A LVDS Clock (positive)

    LVDS0_CLK_N

    Channel A LVDS Clock (negative)

    LVDS0_TX0_P

    Channel A LVDS Data 0 (positive)

    LVDS0_TX0_N

    Channel A LVDS Data 0 (negative)

    LVDS0_TX1_P

    Channel A LVDS Data 1 (positive)

    LVDS0_TX1_N

    Channel A LVDS Data 1 (negative)

    LVDS0_TX2_P

    Channel A LVDS Data 2 (positive)

    LVDS0_TX2_N

    Channel A LVDS Data 2 (negative)

    LVDS0_TX3_P

    Channel A LVDS Data 3 (positive)

    LVDS0_TX3_N

    Channel A LVDS Data 3 (negative)

    LVDS1_CLK_P

    Channel B LVDS Clock (positive)

    LVDS1_CLK_N

    Channel B LVDS Clock (negative)

    LVDS1_TX0_P

    Channel B LVDS Data 0 (positive)

    LVDS1_TX0_N

    Channel B LVDS Data 0 (negative)

    LVDS1_TX1_P

    Channel B LVDS Data 1 (positive)

    LVDS1_TX2_P

    Channel B LVDS Data 2 (positive)

    LVDS1_TX2_N

    Channel B LVDS Data 2 (negative)

    LVDS1_TX3_P

    Channel B LVDS Data 3 (positive)

    LVDS1_TX3_N

    Channel B LVDS Data 3 (negative)

     

    2.13.3  Parallel RGB Display

    The Trizeps VIII Plus can be equipped with a Lattice MachXO3 FPGA with up to 4300LUT. This FPGA may be programmed to convert the MIPI-DSI data stream into parallel display output. Although this allows flexible pinning, it is recommended to follow the Trizeps SODIMM200 standard.

    Name

    Description

    FPGA_LCD_PCLK

    Pixel-Clock

    FPGA_LCD_DE

    Data-Enable / Data-Valid

    FPGA_LCD_HSYNC

    Horizontal Sync

    FPGA_LCD_VSYNC

    Vertical Sync

    FPGA_LCD_D00

    blue [0]

    FPGA_LCD_D01

    blue [1]

    FPGA_LCD_D02

    blue [2]

    FPGA_LCD_D03

    blue [3]

    FPGA_LCD_D04

    blue [4]

    FPGA_LCD_D05

    24bpp: blue [5]

    18bpp: blue [5]

    16bpp: green [0]

    FPGA_LCD_D06

    24bpp: blue [6]

    18bpp: green [0]

    16bpp: green [1]

    FPGA_LCD_D07

    24bpp: blue [7]

    18bpp: green [1]

    16bpp: green [2]

    FPGA_LCD_D08

    24bpp: green [0]

    18bpp: green [2]

    16bpp: green [3]

    FPGA_LCD_D09

    24bpp: green [1]

    18bpp: green [3]

    16bpp: green [4]

    FPGA_LCD_D10

    24bpp: green [2]

    18bpp: green [4]

    16bpp: green [5]

    FPGA_LCD_D11

    24bpp: green [3]

    18bpp: green [5]

    16bpp: red [0]

    FPGA_LCD_D12

    24bpp: green [4]

    18bpp: red [0]

    16bpp: red [1]

    FPGA_LCD_D13

    24bpp: green [5]

    18bpp: red [1]

    16bpp: red [2]

    FPGA_LCD_D14

    24bpp: green [6]

    18bpp: red [2]

    16bpp: red [3]

    FPGA_LCD_D15

    24bpp: green [7]

    18bpp: red [3]

    16bpp: red [4]

    FPGA_LCD_D16

    24bpp: red [0]

    18bpp: red [4]

     

    FPGA_LCD_D17

    24bpp: red [1]

    18bpp: red [5]

     

    FPGA_LCD_D18

    24bpp: red [2]

     

     

    FPGA_LCD_D19

    24bpp: red [3]

     

     

    FPGA_LCD_D20

    24bpp: red [4]

     

     

    FPGA_LCD_D21

    24bpp: red [5]

     

     

    FPGA_LCD_D22

    24bpp: red [6]

     

     

    FPGA_LCD_D23

    24bpp: red [7]

     

     

     

    1.13.4  HDMI

    The HDMI signals are routed to the B2B-connector and the SODIMM.

    Name

    Description

    HDMI_CLKP

    HDMI Clock (positive)

    HDMI_CLKN

    HDMI Clock (negative)

    HDMI_TX0P

    HDMI Data 0 (positive)

    HDMI_TX0N

    HDMI Data 0 (negative)

    HDMI_TX1P

    HDMI Data 1 (positive)

    HDMI_TX1N

    HDMI Data 1 (negative)

    HDMI_TX2P

    HDMI Data 2( positive)

    HDMI_TX2N

    HDMI Data 2( negative)

    HDMI_DDC_SCL

    HDMI Control Interface Clock

    HDMI_DDC_SDA

    HDMI Control Interface Data

    HDMI_HPD

    HDMI Hot Plug Detection

    HDMI_CEC

    HDMI Consumer Electronics Control

     

    2.14   Camera

    The i.MX8M Plus Processor got two MIPI CSI camera interfaces.
    They are connected to the B2B-connector.

    Name

    Description

    MIPI_CSI1_CLK_N

    First camera clock input – negative

    MIPI_CSI1_CLK_P

    First camera clock input – positive

    MIPI_CSI1_D0_N

    First camera data lane 0 – negative

    MIPI_CSI1_D0_P

    First camera data lane 0 – positive

    MIPI_CSI1_D1_N

    First camera data lane 1 – negative

    MIPI_CSI1_D1_P

    First camera data lane 1 – positive

    MIPI_CSI1_D2_N

    First camera data lane 2 – negative

    MIPI_CSI1_D2_P

    First camera data lane 2 – positive

    MIPI_CSI1_D3_N

    First camera data lane 3 – negative

    MIPI_CSI1_D3_P

    First camera data lane 3 – positive

    MIPI_CSI2_CLK_N

    Second camera clock input – negative

    MIPI_CSI2_CLK_P

    Second camera clock input – positive

    MIPI_CSI2_D0_N

    Second camera data lane 0 – negative

    MIPI_CSI2_D1_N

    Second camera data lane 1 – negative

    MIPI_CSI2_D1_P

    Second camera data lane 1 – positive

    MIPI_CSI2_D2_N

    Second camera data lane 2 – negative

    MIPI_CSI2_D2_P

    Second camera data lane 2 – positive

    MIPI_CSI2_D3_N

    Second camera data lane 3 – negative

    MIPI_CSI2_D3_P

    Second camera data lane 3 – positive

    Speed: Support 80Mbps – 1.5Gbps data rate in high speed operation
                            Support 10Mbps data rate in low power operation.
    Features:         up to 4-lane; 1.5 Gbps per lane,
    Support up to 1080p@60fps video capture.

      

    Name

    Description

    CSI1_PWDN

    This GPIO is typical used to control the Power-Down pin of a camera.

    CSI_RESET

    This GPIO is typical used to control the Reset-pin of a camera.

     

    2.15   Wireless

    The Trizeps VIII Plus may be equipped with a HD Wireless SPB228, Silex SX-PCEAC2 or AzureWave CM276NF module.
    The antennas are connected directly to the module.

    Name

    Description

    BT_LED

    BT active LED

     

    2.16   Audio

    The Trizeps VIII Plus uses a WM8962 audio-codec. (Other codec-options available on request)

    Name

    Description

    AUDIO_MIC_OUT

    Main mic input

    AUDIO_MIC_GND

    Microphone ground

    AUDIO_LINEIN_L

    LineIn left channel input

    AUDIO_LINEIN_R

    LineIn right channel input

    AUDIO_HEADPHONE_L

    Headphone left channel output

    AUDIO_HEADPHONE_R

    Headphone right channel output

    AUDIO_HEADPHONE_GND

    Headphone ground sensing input

    SPEAKER_P

    Class-D speaker amp + output

    SPEAKER_N

    Class-D speaker amp – output

    AUDIO_ENABLE

    This GPIO is typical used to control the enable pin of an external audio-amplifier connected to the AUDIO_HEADPHONE pins.

     

    2.17   SPDIF

    The i.MX8M Plus supplies a Sony/Philips Digital Interface (SPDIF) stereo transceiver that allows the processor to receive and transmit digital audio.

    Name

    Description

    SPDIF_IN

    SPDIF input

    SPDIF_OUT

    SPDIF output

    SPDIF_EXT_CLK

    SPDIF clock

     

    2.18   Secure Element

    The Trizeps VIII Plus supports a built-in Secure Element solution consisting of a NXP SE050 which is connected to I2C3.

     

    3      Specifications

    3.1      Absolute Maximum Ratings

    Absolute maximum ratings reflect conditions that the module may be exposed outside of the operating limits, without experiencing immediate functional failure. Functional operation is only expected during the conditions indicated under “Recommended Operating Conditions”. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the module. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.

     

    Pin

    Min

     

    Max

    Unit

    Supply Voltage

    +3V3_SNVS
    VSYS
    AUDIO_VDD
    AVDD_SPEAKER

    -0.3
    -0.3
    -0.3
    -0.3

     

    3.8
    5.5
    4.5
    7.0

    V
    V
    V
    V

    Storage Temperature

    TStorage

    -40

     

    +85

    °C

     

    3.2      Recommended Operating Conditions

     

    Pin

    Min

    Typ

    Max

    Unit

    Supply Voltage

    +3V3_SNVS
    VSYS
    AUDIO_VDD
    AVDD_SPEAKER

    3.1
    3.1
    2.8
    2.8

    3.3
    3.3
    3.3
    3.3

    3.4
    5.0
    3.4
    5.0

    V
    V
    V
    V

    Supply current (typ.)
    Power consumption dramatically depends on the usage scenario.
    This includes things like if the processors operating point (frequency) can be set to a lower level; if the GPU can be used by an application; the selected display-resolution or if the module supplies external peripherals i.e. a speaker or if the PMIC charges a battery.

     We recommend to use a 2A voltage-regulator to supply the module.

       @ 3.3V
       Idle
       Using/Running

      Typ. Peak Currents    when running.

    416 

    757

     

     1.151

     

     

    456.5
    824



     522

     923

     

     

    mA
    mA
    mA

    A

    Operating temperature
    The chip temperature of processor or LPDDR4 might get hotter. The max. case temperature of i.MX 8M Plus is specified with +95°C (consumer) and +105°C (industrial).
    A higher refresh-rate-setting is needed when case temperature of LPDDR4 is expected to rise above +85°C.
    Temperature of eMMC influence the achievable Data Retention.

    TConsumer
    TExtended
    TIndustrial

    0
    -25
    -40

    +25
    +25
    +25

    +85
    +85
    +85

    °C
    °C
    °C

     

    3.3      ESD Ratings

     

     

    Max

    Unit

    V(ESD) Electrostatic
    discharge

    Human body model (HBM)
    Charged-device model (CDM)

    ±1000
    ±250

    V
    V

     

    3.4      Electrical Characteristics

    3.4.1  i.MX 8M Plus GPIO DC parameters. Please view i.MX 8M Plus datasheet for details:

     

    Parameter

    Min

    Max

    Unit

    VIL_3V3

    Low-level input voltage

    -0.3

    0.3 x VDD

    V

    VIH_3V3

    High-level input voltage

          0.7 x VDD

    VDD + 0.3

    V

    VOH_3V3

    High-level output voltage

          0.8 x VDD

    VDD

    V

    VOH_3V3

    Low-level output voltage

    0

    0.2 x VDD

    V

    RP_up

    Pull-Up Resistance (1)

    18

    72

    kΩ

    RP_down

    Pull-Down Resistance (1)

    24

    87

    kΩ

    • The i.MX 8M Plus does not support internal pull-up/down for VDD=3.3V.

    • The state of the GPIO-pins is undefined until the PMIC has powered-up and +3V3_AUX is supplied.

     

    3.4.2  FPGA single-Ended DC parameters. Please view FPGA datasheet for details:

     

    Parameter

    Min

    Max

    Unit

    VIL_3V3

    Low-level input voltage

    -0.3

    0.8

    V

    VIH_3V3

    High-level input voltage

    2.0

    3.6

    V

    VOH_3V3

    High-level output voltage

    VSYS–0.2 (IOH=-100µA)
    VSYS-0.4 (IOH=-16mA)

    -

    V

    VOH_3V3

    Low-level output voltage

                -

    0.2 (IOL=100µA)
    0.4 (IOL=16mA)

    V

    IPU

    Pull-Up Current

               -30

    -309

    µA

    IPD

    Pull-Down Current

               30

    305

    µA

     

    3.4.3  Cortex M0+ MCU DC parameters. Please view MCU datasheet for details:

     

    Parameter

    Min

    Max

    Unit

    VIL_3V3

    Low-level input voltage

    -

    0.35 x VCC_SNVS

    V

    VIH_3V3

    High-level input voltage

      0.7 x VCC_SNVS

    -

    V

    VOH_3V3

    High-level output voltage

    VSYS–0.5 (IOH=-5mA)
    VSYS-0.5 (IOH=-18mA)

    -

    V

    VOH_3V3

    Low-level output voltage

                -

    0.5 (IOL=5mA)
    0.5 (IOL=18mA)

    V

    IOHT

    Output high current total for all ports

                -

    100

    mA

    IOLT

    Output low current total for all ports

     -

    100

    mA

    RPU

    Internal pullup resistor

               20

    50

    kΩ

     

    3.5      Mechanical Specification

    Dimensions (mm) of the Trizeps VIII Plus module (top view)

    Dimensions (mm) of the Trizeps VIII Plus module (bottom view)

    4      Article numbers for Trizeps VIII Plus

    Part number structure

    Examples article numbers

    Article number 00…

    Trizeps VIII Plus

    66B21.E0912.
    H00S00

    Trizeps VIII Plus EC/
    Quad/IT1600/R2G/EMMC8G/ ETH/COD/RoHS
    (Extended Consumer Temperature -25 to 85°C, i.MX 8M Plus Quad Core, IT 1.6 GHz,
    2 GB RAM, 8 GB eMMC, Ethernet, Codec)

    66A21.C2B32.
    H00S00

    Trizeps VIII Plus CT/Quad/
    C01800/R2G/EMMC8G/FPGA/ ETH/COD/MCU/WB/RoHS
    (Consumer Temperature 0 to 70°C, i.MX 8M Plus Quad Core, C0 1.8 GHz, 2 GB RAM,
    8 GB eMMC, FPGA LF21,  Ethernet, Codec, Kinetis MCU, WLAN, BT)

     Other versions on request

    5     Important Notice

     

    6     Document History

    Rev.

    Date

    Author

    Changes

    0.9

    08.03.2022

    JP

    Initial version

    0.9.1

    24.05.2022

    VoB

    Chapter 4.0 adjusted

    0.9.2

    08.06.2022

    JP

    Minor changes

    1.0

    21.11.2022

    MP

    Update new CI

     

     

     

     

     

     

     

     

    Baseboard & Panels

    The Trizeps VIII Plus fits into following Seco products: